The CarSys easy help you determine: Check Engine Light, Clears Codes, I/M Readiness Status, VIN, CALID, CVN, O2 Sensor Test, Mode $06 Test…
WARNING! China clones ELM327 v2.1 can crashes and stop wroking . If you have this adapter, please don’t rate this application!
Tested with OBDLink MX Bluetooth, ELM327 Clone Bluetooth V1.5, Vgate Bluetooth.
★ Key Features:
– Read DTCs: Store DTCs, Pending DTCs, Permanent DTCs and Freeze Frame DTCs.
– Clear DTCs:
• Clear all the current DTCs
• Clear I/M readiness
• Distance traveled while MIL is activated
• Number of warm-ups since DTCs cleared
• Distance traveled since DTCs cleared
• Engine run time while MIL is activated
• Engine run time since DTCs cleared.
– Live data: Read all real-time data.
– I/M Readiness Test: Readiness the status that all diagnostic functions.
– Read Vehicle Information:
• Vehicle Identification Number(VIN).
• Calibration IDs (CALID).
• Calibration Verification Number (CVN).
• In-use Performance Tracking (IPT).
– O2 Sensor Test (Mode$05).
– On-board MoinitorTest (Mode $06).
– EVAP System Test (Mode$08).
– Dashboard with Gauge and Graph.
– Hardware: OBDLink Bluetooth Farmily, KiWi Bluetooth Farmily, ELM327 Bluetooth Farmily, BAFX Bluetooth.
– Protocol: All protocol OBD2.
• USA: All cars and light trucks manufactured since 1996 (OBD2)
• EU-Gasoline: Registered after 2001 (EOBD)
• EU-Diesel: Registered after 2004 (EOBD)
Fixed On-board Monitor Test
Fixed O2 sensor Test
Copyright© 2017 Oxyi Appstore